Auction transmission

Reply

  #1  
Old 05-15-17, 11:51 PM
Member
Thread Starter
Join Date: May 2010
Location: usa
Posts: 21
Auction transmission

So I bought this transmission from a auction with no information on it except that the one wheel wont move. I tore it apart and found what is called an axle bearing block to be ceased from rust, but lubricant and a pipe wrench got it moving again. So should I replace the "axle bearing block" or just run it?
What kind of oil can replace the factory oil?
Do I replace the gaskets or put RTV in its place?



Name:  mow1.jpg
Views: 126
Size:  49.7 KBName:  mow2 (1).jpg
Views: 122
Size:  43.7 KBName:  mow3.jpg
Views: 116
Size:  40.8 KBName:  mow4.jpg
Views: 112
Size:  30.1 KB
 
Sponsored Links
  #2  
Old 05-16-17, 10:50 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
I'd run it if it's not loose and sloppy. Gear oil/differential lube should be fine for oil... probably 90 weight. Black silicone permatex is fine for a gasket.
 
  #3  
Old 05-18-17, 09:36 PM
Member
Thread Starter
Join Date: May 2010
Location: usa
Posts: 21
Name:  mow5.jpg
Views: 102
Size:  30.2 KB
This is what i bought for oil and gasket maker can you tell me if this looks right?
 
  #4  
Old 05-18-17, 10:01 PM
Gunguy45's Avatar
Super Moderator
Join Date: Dec 2007
Location: USA
Posts: 20,979
I don't even have to be an expert. You are good to go. Make sure the mating surfaces are clean and de-greased before applying the Permatex.
 
  #5  
Old 05-19-17, 12:05 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
You got it!
___________________
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes