DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Outdoor Gasoline and Electric Powered Equipment and Small Engines

Huskvarna ZTR Manufacturing Numbers

Thread Tools

Search this Thread

05-17-17, 07:53 AM

Baldwin

Member

Thread Starter

Join Date: Jun 2002

Location: Northern Minnesota

Posts: 1,626

Upvotes: 94

Received 13 Upvotes on 9 Posts

Huskvarna ZTR Manufacturing Numbers

My manual says the numbers are on a plate in the engine compartment. I looked everywhere yesterday and I can't find anything.

Anyone know where it is?

Thanks

Upvote

05-17-17, 12:16 PM

BFHFixit

Banned. Rule And/Or Policy Violation

Join Date: Jun 2007

Location: USA.

Posts: 1,511

Upvotes: 0

Received 0 Upvotes on 0 Posts

Should be under the seat
.

Upvote

05-17-17, 01:45 PM

Baldwin

Member

Thread Starter

Join Date: Jun 2002

Location: Northern Minnesota

Posts: 1,626

Upvotes: 94

Received 13 Upvotes on 9 Posts

Looked again today, couldn't find it. Came back from the store and while sweeping the floor I notice from 15' away this shiny thing under the fender just in front of the back tire on the side of the frame. DOH.

Guess I'm not as limber as I should be.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Outdoor Gasoline and Electric Powered Equipment and Small Engines
Chainsaw chain (Homelite 14" model 3514c) keeps slipping off the bar

M

MichaelChang on May 13, 2017

I was cutting into a pile of junk and the chain slipped off the bar. I readjusted it no problem. It happened again after a while, this time the chain didn't flow as freely through the bar. A couple more times, it got harder and harder to readjust so I laid a piece of wood flat across sawhorses, easiest thing to cut, nothing to jar the chain off the bar, it happened again. At this point, even if I'm able to get the chain back on the bar (harder each time), it comes off right away. : (Read More
Outdoor Gasoline and Electric Powered Equipment and Small Engines
Need a gas powered trimmer

B

Brian1900 on May 12, 2017

What's a good trimmer, preferably gas powered that's around maybe $150 or so. Are the ones priced lower than $100 not good? The guy at HD said "We got a good one her for $69!" I think it was some off brand or something.Read More

Ask a Question