Craftsman Snow blower
#1
Member
Thread Starter
Join Date: Jul 2016
Location: Canada
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Craftsman Snow blower
Hi my snow blower is a Craftsman C950-52461-1 9.5 hp 29 inch. I bought it second hand and it work great, except this:
Often it stop moving, forward and backward, then I simply lift the wheels off the ground and they turn again, sometime I do it a few times and it start moving again. I changed the friction disc , clean everything on both the friction disc and the plate. What could be the problem. I assume if it was adjustment cable it wouldn't just move then stop then start again. it's very odd.
Any help would be appreciate. I know it's a old model, I read a few old thread about it.
Often it stop moving, forward and backward, then I simply lift the wheels off the ground and they turn again, sometime I do it a few times and it start moving again. I changed the friction disc , clean everything on both the friction disc and the plate. What could be the problem. I assume if it was adjustment cable it wouldn't just move then stop then start again. it's very odd.
Any help would be appreciate. I know it's a old model, I read a few old thread about it.
#3
When you squeeze the drive control you are pulling the drive wheel into the friction disc. If that isn't adjusted tight enough... it will slip. A very common problem.