Installing New B&S Carb Question

Reply

  #1  
Old 05-04-18, 02:49 PM
Member
Thread Starter
Join Date: Feb 2006
Location: USA
Posts: 6,356
Installing New B&S Carb Question

I will be installing the carb pictured below on my pressure washer.

Should I use any type of sealant on the gaskets?
 
Attached Images  
Sponsored Links
  #2  
Old 05-04-18, 02:54 PM
BFHFixit's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Jun 2007
Location: USA.
Posts: 1,836
no
You could put a sheen of oil or grease on the o-ring then wipe it dry with a rag.
 
  #3  
Old 05-05-18, 12:08 PM
Member
Thread Starter
Join Date: Feb 2006
Location: USA
Posts: 6,356
Thanks for the help. Job completed. Will test engine next week.
 
  #4  
Old 05-10-18, 07:15 AM
Member
Thread Starter
Join Date: Feb 2006
Location: USA
Posts: 6,356
Update: Engine started a ran no problem. Now I have no excuses.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'