So confused
#1
So confused
Hi All, what size tap do I use to chase the threads for the emulation tube in a B&S Flo Jet carb ?
Thanks
Geo🇺🇸
Thanks
Geo🇺🇸
#2
Wish I could tell you. I have thrown a few away because the threads were bad, usually from me using the wrong kind of screwdriver to get the jet out (tapered blade).
#3
Member
Briggs sells a kit # 19245 with both taps for the small and medium Flo-Jet. Special size, 1/4" x 32 and 5/16" x 32.