Lawnboy starter


Old 09-24-01, 08:46 AM
Visiting Guest
Posts: n/a
model: Lawnboy 21?? (not sure) deluxe
problem: the starter mechanism does not engage the engine teeth when rope pulled. One problem was the starter mechanism was not completely inserted into the block. Fixed this. I have taken it apart - can't figure out how the starter clip (one piece) attaches. I believe this is the piece that resets the starter and keeps it disengeged from the engine after the rope is pulled. Could there be parts missing?
Sponsored Links
Old 09-24-01, 12:52 PM
Visiting Guest
Posts: n/a
On the right side there should be an "ear" that both sides
of that clip should surround. It kicks the gear forward
and makes it retract, if missing, it probably is broke.
The clip rides in that ridge on the edge of the starter

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes