5.0 mm paneling

Reply

  #1  
Old 03-25-00, 02:09 AM
Visiting Guest
Posts: n/a
Question

When planning I chose to use 1/4" paneling so I could nail directly to 2x4 studs. I used a sample from a local store to make my selection, which stated it was 1/4". However, after I received it I noted that it was 5.0 mm (13/64"). After looking my paneling selection up on the Georgia Pacific web page it appears that it only comes in 5.0 mm thickness. I am going to try and take it back, but since it was a special order they may not. So, my question is can I nail 5.0 mm paneling directly to 2x4 studs?
 
Sponsored Links
  #2  
Old 03-25-00, 02:56 AM
Visiting Guest
Posts: n/a
Post

DaveO:
I am not sure what your project is, but what ever it is, if you nail any paneling directly
onto the studs, it will be wavey within a year. Paneling needs to have a backing, like OBC board or sheetrock or etc. No, you probably will not be able to take back special order material.

------------------
Jack the Contractor
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes