Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

1989 Turbo Probe


kingshab's Avatar
Visiting Guest

Posts: n/a

09-16-02, 06:25 AM   #1  
kingshab
1989 Turbo Probe

BLEW A HEAD GASKET,REPLACED GASKET.NOW WON'T START AND HAVE NOTICED WATER COMING OUT OF EXHAUST PIPE.IS THIS CAUSED BY BLOW BY FROM A BAD PISTON RING.HAD HEAD CHECKED FOR CRACKS THERE WERE NONE.IS AN ALL ALUMINUM HEAD AND BLOCK.DID GET VERY HOT BEFORE WAS SHUT DOWN AND REPAIRED.

 
Sponsored Links
Joe_F's Avatar
Visiting Guest

Posts: n/a

09-16-02, 06:32 AM   #2  
Joe_F
Please kill the caps, no need to shout.

The head is likely cracked at this point. Was it sent out to a machine shop to be checked when the gasket was changed?

Also could have a bad ring as well and it is compressing water.

Be careful about spending any money on a Turbo Probe, they are collosal bombs .

 
Search this Thread