Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

Dodge Dakota-Belt installation


BuzzTIB's Avatar
Visiting Guest

Posts: n/a

09-21-02, 11:55 AM   #1  
BuzzTIB
Dodge Dakota-Belt installation

I am currently in the midst of re-installing the serpintine belt back on my Dakota/5.2ltre (318ci) which came off last night. I need to know the process, what to loosen, tighten, whatever in this matter. My belt is still on one piece and not damaged, I just don't know what to move around and then tighten in order to re-install. Thank you....(2:00p.m. central time, Sept 21.Sat.) Have a good day and thanks again

 
Sponsored Links
rljsmith2001's Avatar
Visiting Guest

Posts: n/a

09-21-02, 06:58 PM   #2  
rljsmith2001
You didn't say what year it is, but most 5.2 have a tensioner on the right side of the engine( Left side as your standing in front of the engine). You need a 15mm wrench or socket to move the tensioner taking pressure off the belt. Routing should be on the underhood label or on the support with the hood latch.

 
Joe_F's Avatar
Visiting Guest

Posts: n/a

09-23-02, 06:07 AM   #3  
Joe_F
Have a look at autolibrary as I have it below.

 
Search this Thread