stalling
#1
stalling
89"mecury,topaz,2.3,inline-4,4-door.
Vehicle starts and runs,but dies when the gear selector is moved into gear.Asif the ignition circut had been severed.
Vehicle starts and runs,but dies when the gear selector is moved into gear.Asif the ignition circut had been severed.
#2
Does it happen intermittently? Or all of the time. If it is all of the time, there is a possibility the torque converter clutch is not releasing. But Let's not jump the gun here. Is the Check Engine Light on? Does it run good? Is it Fuel injected or carburetted?
#8
The locking converter clutch has nothing to do with overdrive other than the fact that if you have a trans with overdrive, you can acheive lock up in overdrive also. The converter clutch will lock in direct drive also. (3rd gear) Never the less it probably isn't the problem with this car since it's not a very common problem with them.