Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

1988 mazda rx7


execelon1's Avatar
Visiting Guest

Posts: n/a

01-24-03, 03:58 PM   #1  
execelon1
1988 mazda rx7

i have been reading these posts pro and con on the mazda they all have merit. i own and drive several different vehicles from rx7 to 4x4's. but i do have a problem now with a 88 rx7 that i just bought. it is loosing coolent. the low coolent light comes on after i drive for about 100mi. i have tried to ( GLASS IT ) sodium sylicate, but it keeps loosing it . now it is starting to run coolent out the overflow. my guess is that the water seal in the chamber has given loose and is allowing coolent in heating it up and causing the loss as well as the overflow due to super heating the coolent. does any one have any cures other than a rebuild ? other than that it runs good. thanks .

 
Sponsored Links
Joe_F's Avatar
Visiting Guest

Posts: n/a

01-24-03, 05:28 PM   #2  
Joe_F
Condition of the cooling system? Last time it was serviced?

Sounds like a gasket issue.

 
Search this Thread