Transmission
#1
Transmission
I have a 88 Nesson Maxima with a auto. trans.
The prob. is that when I shift from reverse or from park it will not go in to drive. The only way it will go is is if I shift to 2 range first then up to drive. After it is in drive the trans. works fine.
Also while parked doing the shifting it seems to shift hard with a slight clunk.
Thanks for any help.
Don
The prob. is that when I shift from reverse or from park it will not go in to drive. The only way it will go is is if I shift to 2 range first then up to drive. After it is in drive the trans. works fine.
Also while parked doing the shifting it seems to shift hard with a slight clunk.
Thanks for any help.
Don
#5
Hey Joe...does it kinda sound like AZbowhunter may have a problem in the adjustment of his shift linkage. Usually I have found that when you have to shift to 2nd gear, then up to drive to get it in drive, its because the linkage has worn and/or come out of adjustment. I bet is goes into park just before the indicator shows that its supposed to as well.
#7
Had heard
Cheese might be right! I have heard from my Son-in-law that a friend of his had the same prob. with the same type of auto. What this person did was have the linkage addjusted. That solved the problem.
I should look into this and hope that is all. It would be hard on my budget if I had to rebuild or get a new tranny.
Don
I should look into this and hope that is all. It would be hard on my budget if I had to rebuild or get a new tranny.
Don