changed the vats's out , still not working

Reply

  #1  
Old 02-25-03, 12:31 PM
RACERXXXX
Visiting Guest
Posts: n/a
changed the vats's out , still not working

I have a 89 iroc , V_8 port inj . My vats ign broke , and the car would not start. after buying the ign , and going to the dealer to get the correct key i cjanged it all out but it still act's the same. when I took out the old ign I could see one of the wires was broke . but it still not starting . is there some thing i am missing ? the guy at the dealer was not a reguler parts guy could he have given me the wrong key . or is there some thing else that could be triggering the vat's? I am getting no responce from the starter when i turn the key. help any thing you might think of to check before I take it in? thanks for your time.
 
Sponsored Links
  #2  
Old 02-25-03, 12:40 PM
Joe_F
Visiting Guest
Posts: n/a
The broken VATS wire is the reason for the no start condition. Fix it and should be good to go.

The dealer has a tool that matches the resistance value of the old key to the new one.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes