Belt Tentioner

Reply

  #1  
Old 03-16-03, 08:39 PM
AVGJOE35
Visiting Guest
Posts: n/a
Belt Tentioner

Not sure if I splelled it right but it sounds good.

Story here is this I went to change belt on my wifes 94' Corsica"V6 W/Air" and noticed the belt tentioner was sprung out a little and cocked in toward the engine. When I tried to lift it up to release tention on the belt it flew off into three peices.

Is this a DIY I'm very mechanically inclined with just about every tool. Just looks hard to get to.
 
Sponsored Links
  #2  
Old 03-17-03, 03:49 AM
Joe_F
Visiting Guest
Posts: n/a
Shouldn't be hard. Get a new part from the dealer, grab a repair manual with photos and go to town.
 
  #3  
Old 03-17-03, 05:35 AM
AVGJOE35
Visiting Guest
Posts: n/a
It's gonna be 70 today.

I'll tackle it and letcha know
 
  #4  
Old 03-17-03, 11:53 AM
AVGJOE35
Visiting Guest
Posts: n/a
Talking

Slice of cake!!

Removed plastic inner wheel well and instant access.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes