Freeze Plug replacement?

Reply

  #1  
Old 04-28-03, 01:26 PM
CaptainRon
Visiting Guest
Posts: n/a
Question Freeze Plug replacement?

Help please,
I have a '93 Dodge B250 Mark III Conversion Van with a 318 engine and automatic transmission. I recently noticed that I had a coolant leak and had two of the freeze plugs changed (the two on the back part of the engine near the top). Now I have another leak, and a friend of mine who owns an auto body/repair shop said that the leak looked like it was coming from at least one of the freeze plugs that is behind the bell housing of the transmission.

My question is, "How do I pull the transmission to get to these freeze plugs?" Is there a handbook available that tells you about pulling the tranmission, how and which bolts to remove, etc. I have an electrical maintenance background and have even changed the motor in a '79 Mustang (about 15 years ago, but had my Dad guiding me), so any help/suggestions will be greatly appreciated.

Ron
Shelby, NC
 
Sponsored Links
  #2  
Old 04-28-03, 01:30 PM
Joe_F
Visiting Guest
Posts: n/a
Check autolibrary.org below, purchase a 25 dollar Alldata.com subscription, or the best option, a Chrysler service manual.

The latter is the recommended book and is available through Dymet, the link is provided in my "The Basics" below.
 
  #3  
Old 04-28-03, 05:29 PM
Member
Join Date: Jul 2002
Location: corona Ca.
Posts: 471
Just my opinion, but I am surprised that a freeze plug went out on you after only 10 years. I have cars ranging from 5-17-30 years old, and have NEVER had to replace a freeze plug on any of them.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes