Stripped threads

Reply

  #1  
Old 08-02-03, 08:46 PM
sylvan
Visiting Guest
Posts: n/a
Stripped threads

Replaced distributor cap on my 1996 jimmy and stripped the threads in one of the cap mounting holes in the distributor. Good thread below the stripped area. Any ideas where a longer screw could be obtained? Could not match the thread size with anything local.
 
Sponsored Links
  #2  
Old 08-03-03, 05:11 AM
Joe_F
Visiting Guest
Posts: n/a
Get a tap/die of that size and recut the threads. Should be fine.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes