to whom it may concern, I would like to know if it hard or very diffuclt to change cv joints on a 1995 camry. I am mech.inclined Do I need special tools or any thing like that. Thanks Charlie

The brake warning light on my 95 Ford Windstar 3.8 liter was coming on intermitently. I noted no fluid leaks or other problems (except the ABS has been unplugged for years as it was broken). To fix the warning, I replaced the master cylinder as this is what the manual seemed to suggest. After replacing the master cylinder, the warning light was okay in driving. The Windstar was not in use for 4 weeks, and now the problem is back! I bled one rear and front wheel again to see if the porportioning switch would reset itself. No luck. Brakes seem to work ok (no imbalance front/back left/right) When I unplug the wires going to the resevoir on top of the master cylinder the light goes out. I did not replace the resevoir on top of the master cylinder yet. Any ideas how to find the cause of the brake warning light? Thanks in advance, Mark