starting trouble

Reply

  #1  
Old 08-28-03, 03:21 PM
merlin1965
Visiting Guest
Posts: n/a
Thumbs down starting trouble

I have a 1990 Ford Ranger 4x4 2.9 v-6 engine. The trouble that I am having is sometimes it won't start. I turn the ignition and all that happens is I get radio all engine lights but no cranking not even a click. I have to jump the seliniod to get it to start. I thought that was the problem so I replaced it. It worked fine for about 2 days now it has started to do it again I am getting really frustrated with it. Any advice would be greatly apperiatied.
 
Sponsored Links
  #2  
Old 08-28-03, 04:02 PM
Member
Join Date: Apr 2002
Location: Pittsburgh,Pa
Posts: 2,417
I would take a look at the ignition switch it operates the solenoid.
 
  #3  
Old 08-28-03, 04:29 PM
Joe_F
Visiting Guest
Posts: n/a
That, and cables in poor condition are notorious trouble spots on Fords.

Piss poor design.
 
  #4  
Old 08-28-03, 04:53 PM
merlin1965
Visiting Guest
Posts: n/a
I checked all conections and cleaned them up already sorry I forgot to mention that. It did it again just alittle while ago and all I did was take it out of Park and slammed it back into park and it started.
 
  #5  
Old 08-29-03, 04:10 AM
Joe_F
Visiting Guest
Posts: n/a
Check your linkage and neutral safety switch.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes