no spark 1993 ford ranger


Old 03-20-04, 10:53 AM
Visiting Guest
Posts: n/a
no spark 1993 ford ranger

i have a no start condition on a 1993 ford ranger with a 2.3L spark at either coil...replaced ignition module ...still no there a fusible link somewhere?....maybe the main computer
Sponsored Links
Old 03-20-04, 12:42 PM
Join Date: Jun 2002
Location: Long Island, NY
Posts: 1,531
Received 0 Votes on 0 Posts
Do you have power to the coils? I lifted this from Davo

Check for power at the coil with the key on and while cranking(positive side).If you have power there take a test light from the positive to neg side of the coil the light should flash,if it does the coil is bad.If it doesn't you likely have a wire problem.
What about T-belt?
Old 03-20-04, 01:39 PM
Desi501's Avatar
Join Date: Oct 2003
Location: Boynton Beach Florida
Posts: 2,207
Received 0 Votes on 0 Posts
Crank sensor is a very likely suspect.
Old 03-20-04, 02:03 PM
Join Date: Apr 2002
Location: Pittsburgh,Pa
Posts: 2,417
Received 0 Votes on 0 Posts
I would also check the crank sensor.As a side note computers don't go bad very often.Many computers are replaced because basic systems are not checked properly.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Ask a Question
Question Title: