1996 Ford Taurus Remote Entry program
#1
1996 Ford Taurus Remote Entry program
Does anyone know how to program the remote entry/alarm key fob for a dealer installed alarm system on a 1996 Ford Taurus? Would be nice not to have to take it back to the dealer. Any help would be appreciated
#2
1. Insert the keys in the ignition and turn the ignition switch from OFF to RUN, five times within ten seconds, ending in RUN. If the vehicle has successfully entered the program mode, it will lock and then unlock all doors automatically.
2. Press ANY button on a keyless entry remote transmitter and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. NOTE: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.
3. Repeat the previous step for each transmitter that will operate the vehicle.
4. If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again.
2. Press ANY button on a keyless entry remote transmitter and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. NOTE: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.
3. Repeat the previous step for each transmitter that will operate the vehicle.
4. If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again.