1992 Oldsmobile Cutlass Ciera

Reply

  #1  
Old 06-02-05, 08:07 PM
DarkMan
Visiting Guest
Posts: n/a
1992 Oldsmobile Cutlass Ciera

1992 Oldsmobile Cutlass Ciera Harmonic Balancer Removel


I have a 92 olds with a 3300 Engine (V6) I am in the middle of replacing the crank senor an My harmonic balancer remover tool bolts dont fit it I am leary of using a 3 jaw puller I dont want it seperating making my job more costly. Anyone have a good guess as to the bolt hole sizes in the balancer ? I found a tool online an it runs 200 Bucks for removing it an it is desgined simular to a standerd harmonic balancer remover. Any advice at this point will help.


The tool I found online has a GM # of Crankshaft Balancer Remover - J-38197-A

That is the tool I found Any other details I can think of I will add to this post

Again thanks for any an all help Right now I am ready to drive the thing into Lake Mead (if it stays running long enough to get it out there LOL
 
Sponsored Links
  #2  
Old 06-03-05, 06:03 AM
Member
Join Date: Apr 2003
Posts: 174
When I replaced mine, I went to Home Depot and got the correct bolts, had to use some washers also, but all was/is well.
 
  #3  
Old 06-03-05, 10:46 AM
DarkMan
Visiting Guest
Posts: n/a
Smile Ok

What size bolt did you use tho ?
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes