1980 Ford Fairmont 3.3L


  #1  
Old 10-02-07, 02:15 PM
P
Member
Thread Starter
Join Date: Jun 2006
Posts: 4
Upvotes: 0
Received 0 Upvotes on 0 Posts
1980 Ford Fairmont 3.3L

Am trying to locate the rag joint.Checked a lot of web sites;no success---car finish oxidized-- where do I start--what should I start with or use???? Thanx again for your help
 
  #2  
Old 10-02-07, 03:10 PM
HotxxxxxxxOKC's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Jul 2006
Location: USA
Posts: 7,754
Upvotes: 0
Received 1 Upvote on 1 Post
Rag joint as in the steering system?

Oxidation in your paint? If so, nothing you can do except sand down all the clear coat and paint and start fresh.
 
  #3  
Old 10-02-07, 08:38 PM
thiggy's Avatar
Member
Join Date: May 2002
Location: Alabama
Posts: 698
Upvotes: 0
Received 0 Upvotes on 0 Posts
I would measure the original one (diameter, thickness, hole spacing) and compare it to a new rag joint from a similar aged mustang.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: