torque for oil pan bolts 92 Ford Aerostar

Reply

  #1  
Old 03-29-06, 06:03 PM
Member
Thread Starter
Join Date: Feb 2006
Posts: 4
torque for oil pan bolts 92 Ford Aerostar

I am replacing the oil pan on my 92 aerostal 3.0l. I have the pan and 1 piece fel-pro rubber gasket. Does anyone know what the torque setting should be for the bolts? My first time replacing one and I don't want it leaking all over.
Any help is appreciated.
Thanks
Bob
 
Sponsored Links
  #2  
Old 03-29-06, 08:16 PM
Member
Join Date: Feb 2006
Posts: 361
ohv engine 89-123 in-lbs. ohc 15-22 in-lbs. from book. (This is just my opinion.)
 
  #3  
Old 03-29-06, 09:07 PM
LouBazooka's Avatar
Member
Join Date: Dec 2005
Posts: 553
Originally Posted by cleverdoc
I am replacing the oil pan on my 92 aerostal 3.0l. I have the pan and 1 piece fel-pro rubber gasket. Does anyone know what the torque setting should be for the bolts? My first time replacing one and I don't want it leaking all over.
Any help is appreciated.
Thanks
Bob


I don't know the exact number but do not overtighten, actual torque should be very low.
 
  #4  
Old 03-30-06, 05:29 PM
Member
Join Date: Mar 2006
Location: massachusetts, usa
Posts: 28
whenever doing tranny pans I use a 1/4 inch drive speed wrench and try not to get over zealous....perhaps old school but it seems to work
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'