honda/acura valve adjustment
#1
Member
Thread Starter
Join Date: Sep 2004
Posts: 233
Upvotes: 0
Received 0 Upvotes
on
0 Posts
honda/acura valve adjustment
'95 1.8 dohc acura integra (not vetec)
according to the haynes book, a special tool is required to hold the screw while the jam nut is tightened. Is this true? I have not removed the valve cover.
I have called around and nobody has the tool but it can be ordered.
Next question: Is the nut 10 or 12 mm?
according to the haynes book, a special tool is required to hold the screw while the jam nut is tightened. Is this true? I have not removed the valve cover.
I have called around and nobody has the tool but it can be ordered.
Next question: Is the nut 10 or 12 mm?
#2
Member
Thread Starter
Join Date: Sep 2004
Posts: 233
Upvotes: 0
Received 0 Upvotes
on
0 Posts
haynes book wrong
The haynes book is wrong.
I opened it this weekend. I used a screwdiver and 12mm box-end wrench. I was easier than my '67 bug since I did no need to lie on my back to do it.
I opened it this weekend. I used a screwdiver and 12mm box-end wrench. I was easier than my '67 bug since I did no need to lie on my back to do it.