Sears 3 ton Floor Jack

Reply

  #1  
Old 04-23-06, 04:57 PM
Member
Thread Starter
Join Date: Nov 2002
Location: Mass
Posts: 151
Sears 3 ton Floor Jack

I recently was given a Sears 3 ton floor jack. The jack is the bigger pro looking ones with handle release and all that.

The problem is it only goes up so far then stops. It will hold weight.

If anyone has this model and knows where you drain and refill the fluid I would appreciate any input on this. Thanks in advance John.
 
Sponsored Links
  #2  
Old 04-23-06, 08:40 PM
LouBazooka's Avatar
Member
Join Date: Dec 2005
Posts: 553
Originally Posted by JOHNJOHN
I recently was given a Sears 3 ton floor jack. The jack is the bigger pro looking ones with handle release and all that.

The problem is it only goes up so far then stops. It will hold weight.

If anyone has this model and knows where you drain and refill the fluid I would appreciate any input on this. Thanks in advance John.

i own one too same model 3 tons, they dont go too far up though maybe a foot or so from lowest point, never seen any drain plug only zerk grease fitting on it , do you see a leak on it ? why would it lose hydraulic fluid ?
 
  #3  
Old 04-24-06, 06:08 AM
Member
Join Date: Aug 2003
Location: Cape Cod
Posts: 4,320
Guess there must be a couple of different versions
Mine it's pretty obvious
The cap for the jack fluid is red/orange and near where the handle connects
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'