tie rod ends

Reply

  #1  
Old 05-15-06, 04:50 PM
Member
Thread Starter
Join Date: May 2006
Posts: 2
Angry tie rod ends

I have a 85 chevy van G10 trying to replace the outer tie rod ends but having trouble getting the end out of the steering knuckle. The nut came off ok and the top of the rod end I took a hammer and knocked it off but the rod end shaft is stuck in the hole and won't come out. any suggestions? thanks in advance.
 
Sponsored Links
  #2  
Old 05-15-06, 07:16 PM
Member
Join Date: Apr 2005
Posts: 242
Use a tie rod end fork tool or hit it harder with the hammer.
 
  #3  
Old 05-17-06, 08:55 AM
Member
Thread Starter
Join Date: May 2006
Posts: 2
Red face tie rod ends

to chevy driven:
thanks . I used a clamp plier on the top and wacked the plier with a sledge hammer. thought I would break the knuckle, but the tie rod end popped right off.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'