97 park ave

Reply

  #1  
Old 08-28-06, 12:58 PM
Member
Thread Starter
Join Date: Aug 2006
Posts: 3
97 park ave

My fuel and temp guages are below the pins. Is there anyway that I can reset them so that the guages will work? or do I have to get the computer reprogramed? Any ideas or words of wisdom would be greatly appreciated.
 
Sponsored Links
  #2  
Old 08-29-06, 12:09 PM
Member
Thread Starter
Join Date: Aug 2006
Posts: 3
I got the guages fixed by pulling theneedles over the pins,and then resetting the computer.

Now I need to find a vacuum hose diagram from the fuel pump to the charcoal canister since my hose has completely rotted away and fallen off leaving a 3" stub.
Should I just find an easy route and pull the new hose through there to make the connection, or do I have to follow the diagram for my car?

Guy
 
Reply


Thread Tools
Search this Thread
Display Modes
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 01:40 PM.