DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)

Keyless Entry

Thread Tools

Search this Thread

05-01-07, 07:26 AM

bobt

Member

Thread Starter

Join Date: May 2007

Posts: 13

Upvotes: 0

Received 0 Upvotes on 0 Posts

Keyless Entry

I have a 2000 plymouth voyager that doesn't have the remotes for door locks.I have new ones but dealer wants outragous price to program.
Anyone know how to program new remotes for door locks?

Upvote

05-01-07, 11:14 AM

HotxxxxxxxOKC

Banned. Rule And/Or Policy Violation

Join Date: Jul 2006

Location: USA

Posts: 7,754

Upvotes: 0

Received 0 Upvotes on 0 Posts

Here's a direct link to the programming. Good luck and let us know how it went.

http://dodgeram.info/tsb/2002/08-007-02.htm

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
p0441 grand prix

G

grandprixfan97 on May 01, 2007

if i have a crack in my exhaust near where it conects to the block would that cause me to get the p0441 code? (incorrect purge flow)Read More
Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
Uneven braking

J

jmnew51 on Apr 29, 2007

I have a '90 Mazda Miata. Well the other day when I was driving it, I noticed a drag when I released the accelerator. Felt like I had the parking brake on a little, but I didn't. Then it wouldn't go away and I started to get worried. So I pulled over and noticed the R/FRT brake ass'y was cookin' and I could smell burning brake disc. So I drove it home and manipulated the parking brake to get there. Well today when I disassembled it I could move the piston in and out of the cylinder easily...no stcking. So I put it all back together, took it for a ride and could not get the caliper to stick at all. BUT, what I did notice (and I noticed this in the past) when I lock up all fours the back of the car tends to slide to the left. When I got home I touched the two front rotors and the R/FRT rotor was cooler than the one on the left. I thought the calipers might need replacing, but now I'm not so sure. Could this be a problem with the distribution valve? Because one day it was sticking, but most of the time it won't clamp as hard as the left one? The brake pads are almost brand new, so it's not like the piston is over extended and cocked. When I extended the piston manually I did not see any of the telltale pittings to the chrome surface. Anyone have any idea what might be causing this type of inconsistency? I almost bought it the other day when I had to lock 'em up on wet pavement to avoid an accident. Thanx JimRead More

Ask a Question