DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)

92 honda accord vacuum hose

Thread Tools

Search this Thread

05-04-07, 02:46 PM

judy mae

Member

Thread Starter

Join Date: May 2007

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

92 honda accord vacuum hose

My 92 honda accord lx has a vacuum hose that is not attached to anything and is missing another. My car repair friend says he needs a vacuum hose routing diagram to see whats up. Can anyone help? I just need the diagram...Thanks

Upvote

05-04-07, 03:00 PM

HotxxxxxxxOKC

Banned. Rule And/Or Policy Violation

Join Date: Jul 2006

Location: USA

Posts: 7,754

Upvotes: 0

Received 0 Upvotes on 0 Posts

Hard to find these diagrams online. You might have better luck getting a Chiltons or Haynes manual.

You don' see any connection point around where the hose should go?

Upvote

05-05-07, 03:33 AM

NewHomeowner396

Member

Join Date: Mar 2007

Posts: 192

Upvotes: 0

Received 0 Upvotes on 0 Posts

92 Honda

This looks like a free registration for Honda owners with maybe something you need. https://www.ahm-ownerlink.com/login.asp?brand=honda# or look around here http://automobiles.honda.com/models/model_overview.asp?ModelName=Accord+Coupe

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
subaru outback 97 in need of help baddly

B

boblikeshippos on May 02, 2007

i was driving my car down the road and i noticed that the abs light was on. as i continued down the road my tach started moving violently then died at 0 then the speedomiter went to 0. after this the cars hazards woulndt work the car started to chug slowly then it died. now it wont turn over and is on the side of the road. any ideas on what it could be?Read More
Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
timing belt marks on a 98 stratus 2.5 es

M

marcus_317 on May 05, 2007

i can see the timing mark for the crankshaft and have made the alignment, but the camshafts marks are 180' from the specified engline marks on the rear timing covers, is that how it is supposed to be on a 98 stratus 2.5? i am opperating on a chilton manual and i think i'm supposed to buy a haynes, the chilton says nothing about the alignment for this engine except to align the camshafts to the marks on the rear timing covers. i would align the camshafts directly with the mark on the rear timing cover which would be 180' from where its at except this is an interference engine, and just messing with it without knowing could give me a bigger problem. i am trying to diagnose a rough idle problem, and have replaced all the gaskets on the intake and have checked all the vacuum hoses in hopes that it was a vacuum leak. i have changed the fuel filter, the pcv valve, checked the egr valve, changed the airfilter, cleaned off the 3 sensors on the intake and the idle controll motor. if its not the timing it has to be the pcm (computer) right?Read More

Ask a Question