88 Buick park ave. starter motor replace....


Old 05-26-07, 12:46 PM
Thread Starter
Join Date: Jul 2002
Posts: 49
Received 0 Votes on 0 Posts
88 Buick park ave. starter motor replace....

Helping a friend replace the starter motor of her 1988 buick park avenue with a 3.8L fuel injected engine, AT, front wheel drive car. I thought it would be simplistic, but I have not figured out which bolts hold the thing in place and what bolts I think hold it in will have a plastic cover in the way of me getting a wrench on that seem to not come off until the starter motor is out. Can anyone direct me to a diagram or directions to show me how to get this one out of the car? Thank you in advance for your help!!
Sponsored Links
Old 05-26-07, 01:45 PM
HotxxxxxxxOKC's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Jul 2006
Location: USA
Posts: 8,044
Received 0 Votes on 0 Posts
There should be only two bolts. You may have to remove some stuff to get it out. Here's a link to another Buick 3.8L starter removal. Should be the same motor.


Scroll down towards to bottom of this link.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes
Ask a Question
Question Title: