P0340 Code

Old 07-01-07, 10:46 AM
Thread Starter
Join Date: Jul 2007
Location: Kissimmee
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Cool P0340 Code

From the materials I have read this error is the cam shaft sensor error. I went and purchased a new sensor. I have a 1997 Ford Ranger; 4.0L engine; engine had 67,000 miles. Can anyone out there tell me where the cam shaft sensor is located? I can find materials with the locations of the sensors on the 2.3 and the 3.0 but not the 4.0L.

Any help would be great!

++Moderators note: I copied your issue and made it it's own post so it get's more attention+++

Last edited by HotxxxxxxxOKC; 07-01-07 at 10:54 AM. Reason: Moved post
Old 07-01-07, 10:55 AM
HotxxxxxxxOKC's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Jul 2006
Location: USA
Posts: 7,754
Upvotes: 0
Received 1 Upvote on 1 Post
It should be upper engine area, mounted behind rear of intake manifold, in the engine block.
Old 07-01-07, 11:31 AM
Join Date: Jul 2007
Posts: 16
Upvotes: 0
Received 0 Upvotes on 0 Posts
Mitchell on Demand is saying your sensor is on the top rear of the engine!

Thread Tools
Search this Thread
Ask a Question
Question Title: