Check Engine Light is on, but no code.

Reply

  #1  
Old 09-09-07, 10:38 PM
Member
Thread Starter
Join Date: Oct 2004
Location: Florida
Posts: 358
Check Engine Light is on, but no code.

98 Plymouth Breeze 2.0L 4 cyl 80k miles

I am puzzled. The car had P0302 (cylinder 2 misfire). The car actually shuddered from misfire and hesitated at hard acceleration. The platinum spark plugs were 50k miles old and spark plug wires were original. Replaced both. Engine is running fine. Erased error code.

But the car still has Check Engine Light (MIL) on. Reconnected OBD2 code reader. No code. I am puzzled. Did I miss something?
 
Sponsored Links
  #2  
Old 09-10-07, 05:42 AM
Member
Join Date: Aug 2003
Location: Cape Cod
Posts: 4,320
I'd say it wasn't reset properly
Try it again
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes