ball joints
#1
Member
Thread Starter
Join Date: Jul 2006
Location: USA
Posts: 163
Upvotes: 0
Received 0 Upvotes
on
0 Posts
ball joints
quick question 97 olds bravada ball joints out with a press or drill out rivets and install bolts
#2
Member
Join Date: Feb 2005
Posts: 552
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Drill out the rivits and install bolts. I use a die grinder and put either an X or a straight cut in them. Then, I take the air hammer to them with a chissle bit in it. Swap bits and punch the remnants of the rivets through.