DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)

95 S10 4x4 4.3L ECM Bat Fuse Blows

Thread Tools

Search this Thread

02-05-08, 12:47 AM

dale915

Member

Thread Starter

Join Date: Feb 2008

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

95 S10 4x4 4.3L ECM Bat Fuse Blows

I have a 95 S10 4x4 4.3L, that will blow the ECM bat fuse only when the truck is in gear and I give it to much gas (goose it a little). When its out of gear I can goose the heck out of it and rev the engine to high rpm's and the fuse won't blow. I also had a repair shop run a diagnostic on it and it shows everything is fine. I've changed the fuel pump wiring harness and ECM. Any thoughts about what it could be.

Upvote

02-05-08, 03:42 PM

chandler

Banned. Rule And/Or Policy Violation

Join Date: Dec 2005

Location: USA

Posts: 36,608

Upvotes: 0

Received 9 Upvotes on 8 Posts

Check for a pinched wire that is grounded when the engine torques over. That will blow a fuse.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
oil drain plugs

F

flirty1 on Feb 05, 2008

do drain plugs come loose over time. the car is way past due. to show you how loose the plug was i thought the wrench slipped or i had the wrong size socket on the wrench it turned that easy :eek: is this normal :confused:
Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
cv axel, major boot cut

O

ommegang on Feb 05, 2008

I have a 91 GMC plow truck that has a major rip in the cv axel boot at the wheel - it's completely exposed from the bottom when the wheel is turned. It just started to make a clicking noise when the wheel is turned while in 4wheel drive. I pumped some grease in there and it seemed to help. I planned on changing the axel after plowing season. My question is will it last that long? And what is actually clicking? Thanks in advance, Lance

Ask a Question