DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)

what do i tork the head to on a 1985 jeep cherokee

Thread Tools

Search this Thread

05-16-08, 07:21 PM

dblueyota

Member

Thread Starter

Join Date: May 2008

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

what do i tork the head to on a 1985 jeep cherokee

I don't have a money to buy my lil brother a manual so if you have any clue what to tork the head at please help.. it is a 2.5ltr we just saved the money to re-do the head and not we are stuck and all i know is.. not to over do them. it's a manual 4speed i think and it is 1985 cherokee. thanks for your time.
god bless all,
ash

Upvote

05-17-08, 06:51 AM

the_tow_guy

Group Moderator

Join Date: Feb 2001

Location: SW Fla USA

Posts: 12,018

Upvotes: 78

Received 181 Upvotes on 143 Posts

Check here, ash:

http://www.autozone.com/addVehicleId...00c152800a9932

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
98 Prizm Headliner

J

Jim Stockwell on May 15, 2008

I am a smoker and have worn out the headliner. Its sagging in one spot and starting to separate from the foam at the front windshield. So I'm thinking of replacing it/ repairing it. I cannot find details on how to remove it. The visors have screws - should be no problem. There are three popouts along the rear windshield - should be no problem. The rearview mirror and passenger assist handles don't show any signs of how to remove. Is there some sort of standard on which way they will slide to be removed? Any help, advice would be appreciated
Passenger Cars, Mini Vans, SUV Service and Repairs. (No Trucks)
Loose torque converter?

F

fordman247 on Apr 12, 2008

I have a 95 Mustang, 3.8L SC. When you start it, it has quite a knock. The oil pressure is good and does'nt drop so I don't think it's in the motor. If it's running, and you put the car in gear, with your foot on the brake, the knock seems to quiet down, almost to the point of quitting all together. My best guess is my torque converter is loose or maybe the flywheel is cracked or broken. Do I have to take the tranny out to check this out, or does it have an inspection plate where I can get to the converter bolts?

Ask a Question