1996 Infinity g20 repair valvecover Torq LBs needed
#1
10-11-08, 08:41 AM
Join Date: Oct 2008
Location: Eastern Long Island
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
1996 Infinity g20 repair valvecover Torq LBs needed
Does anybody know the torq LBs needed for the Valvecover on a 1996 infiniti g20. A 2.0 Liter 16v dohc. same engine in the nissan sentra exe that yearGI2
#2
10-11-08, 08:53 AM
Banned. Rule And/Or Policy Violation
Join Date: Jul 2006
Location: USA
Posts: 7,754
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Most torque on these are between 60-80inch lbs. With 70, you should be fine.
Also, Sentra of that year has a 1.6L motor, not the 2.0 that you have.
Also, Sentra of that year has a 1.6L motor, not the 2.0 that you have.
#3
10-11-08, 09:15 AM
Join Date: Oct 2008
Location: Eastern Long Island
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Thanks HotinOKC
I think that year nissan sentra came with th 1.6 and a 2.0. i don't know I was reading it on a website about the Infiniti g20 and they said the closest thing in a nissan would be the upper rated sentra with the same engine. well thanks For the info I'll giv'er a shot.........
