looking for technical data on 1977 Chevy Monte Carlo master cylinder
#1
Member
Thread Starter
looking for technical data on 1977 Chevy Monte Carlo master cylinder
Do you know what bore size a stock 1977 Monte Carlo master cylinder is? My hot rod has a 1977 Granada master cylinder and booster which is 15/16" and I think that it's too small. I kinda think that the MC master is 1" or 1 1/8".
I'm alse wondering if a master from a Monte Carlo can bolt up to the Granada booster. They look similar in the picture, but who knows.
I have removed the combo valve and put a tee in the front lines, then added a manual proportioning valve for the rear. I'm hoping that the additional bore size would provide better pedal.
BTW: 1977 Granada booster and master, 1977 Monte Carlo front disks and rear drums.
I'm alse wondering if a master from a Monte Carlo can bolt up to the Granada booster. They look similar in the picture, but who knows.
I have removed the combo valve and put a tee in the front lines, then added a manual proportioning valve for the rear. I'm hoping that the additional bore size would provide better pedal.
BTW: 1977 Granada booster and master, 1977 Monte Carlo front disks and rear drums.