98 Crown Vic Brake Problem

Reply

  #1  
Old 03-24-16, 06:28 PM
Member
Thread Starter
Join Date: Oct 2002
Location: MINNESOTA
Posts: 161
98 Crown Vic Brake Problem

Hello,

98 Crown Vic. w/ABS

Replaced left front caliper & flex hose. New hose placed on new caliper, both filled with fluid.
Removed old caliper and hose at brake line and immediately attached new hose. Very little fluid lost.
When caliper installed bled brakes until no air and hard peddle. Very little air. Started motor when finished and peddle goes to floor. Bled w. motor running canít get hard peddle unless pumped.
Followed all inst. In manual. Fluid level in Master c always full. What to do next???

Any insight is appreciated.

Tripper
 
Sponsored Links
  #2  
Old 03-24-16, 07:36 PM
ukrbyk's Avatar
Member
Join Date: Mar 2010
Location: USA/ Pacific NW
Posts: 3,221
Bleed ABS module. *******************
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'