Tightening oil pan sump plug

Reply

  #1  
Old 05-16-16, 08:15 AM
Member
Thread Starter
Join Date: Dec 2015
Location: Australia
Posts: 23
Question Tightening oil pan sump plug

Recently got my oil changed and have noticed the car is leaking a lot of oil, think it appears to be coming from the sump plug.

Do you guys think it's just simply tightening it a bit more, or is there possibly a washer or something that might be missing?

Have attached a pic, the plugs that I have seen before have had a male hex fitting, this one is round with a female head. What tool would I use to turn it?

Name:  20160516_233716~01.jpg
Views: 155
Size:  43.4 KB

Thanks (:
 
Sponsored Links
  #2  
Old 05-16-16, 08:28 AM
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 18,298
It is possible you are missing the washer. Usually they are soft copper or aluminum. To tighten your plug you need an Allen wrench. They are available in ANSI (English) and Metric.

 
  #3  
Old 05-16-16, 09:08 AM
Member
Join Date: Oct 2015
Location: USA
Posts: 68
Might also help to know what kind of vehicle you've got.

My Mustang and Explorer don't utilize a washer between the plug and pan, but I know there are many vehicles out there that do use a crush washer there, and a new one would typically need to be installed at each oil change.
 
  #4  
Old 05-16-16, 09:21 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 46,782
You may also be dealing with a stripped drain plug.
I wouldn't recommend trying to tighten it more. I'd take it back where the work was done since the oil will most likely need to be drained for the repair.
 
  #5  
Old 05-16-16, 09:49 AM
Member
Thread Starter
Join Date: Dec 2015
Location: Australia
Posts: 23
Ok, I see. Thank you for everyone's advice. I'll try and call him tomorrow. The vehicle is a '68 E-type Jag..
 
  #6  
Old 05-16-16, 10:27 AM
Forum Topic Moderator
Join Date: Mar 2005
Location: USA
Posts: 44,334
The main thing is was the drain plug leaking prior to the oil change? If it was, it's on you but if this is something totally new then the mechanic should take care of it free of charge.
 
  #7  
Old 05-16-16, 12:12 PM
ukrbyk's Avatar
Member
Join Date: Mar 2010
Location: USA/ Pacific NW
Posts: 3,339
This is why I told my son not to buy a British car yet he did buy a Land Rover. Of course, leaking oil across entire power train from various spots.
OP, you need to get a real oil drain plug. Not that flimsy small head hex bolt. Oil drain plugs have wide flange head. Then you set a COPPER (don't do aluminum) washer under the head, and hand torque it. THAT will work just fine. Like this one here:

http://www.opieoils.co.uk/images/VAR...l/goldplug.png
 
  #8  
Old 05-16-16, 12:25 PM
ukrbyk's Avatar
Member
Join Date: Mar 2010
Location: USA/ Pacific NW
Posts: 3,339
You may also look into this:

Oil Drain Plug | Drain Plug | Sump Plug
 
  #9  
Old 05-16-16, 03:52 PM
Member
Thread Starter
Join Date: Dec 2015
Location: Australia
Posts: 23
It was leaking oil, but not nearly as much as it is now. He's a reasonable guy.
 
  #10  
Old 05-16-16, 03:59 PM
Member
Thread Starter
Join Date: Dec 2015
Location: Australia
Posts: 23
I'll check the replacement plug out
 
  #11  
Old 05-16-16, 08:40 PM
ukrbyk's Avatar
Member
Join Date: Mar 2010
Location: USA/ Pacific NW
Posts: 3,339
Prolly had crud built up stopping more leak. Now that plug was moved, loose threads resulted in more leak.
Oh, not to forget. Yellow teflon tape works very well on those.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes