exhaust problem

Reply

  #1  
Old 01-22-02, 01:13 PM
james gallagher
Visiting Guest
Posts: n/a
exhaust problem

on my 84 ford ranger, with a 2.0L 4cyl. . iam trying to seal the exhaust pipes where i joined them . but with no luck at all , i tried that 2 part epoxy, that didnt work, tried muffler cement , that didnt work, iam trying to seal the pipe that comes off the manifold to the catylytic converter, just small cracks around the pipes where they were joined, what should i be using and where do i get it ? any information would be great . thanks
 
Sponsored Links
  #2  
Old 01-22-02, 01:21 PM
Joe_F
Visiting Guest
Posts: n/a
Likely bent or damaged. Replace the pipe.

Only other solution, and it's a band aid one, is to bring it to a muffler shop and have them weld up the cracks for you. Quite hokey, but *will* get the job done.

Exhaust leaks are dangerous and waste fuel and make a helluva racket.

Sealant won't work
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes