Posts: n/a
07-14-02, 12:56 PM
#1
bconner

I am trying to repair the front disc brakes on a 96' Mazda Protege. The problem I am having is removing the large bolt in the middle of the roter. There appears to be a little spot that is bent in to prevent the bolt from turning. Is there a special tool that is made to push the notch out so the bolt will turn?
Thanks
Brian
Thanks
Brian
Sponsored Links
Posts: n/a
07-14-02, 01:10 PM
#2
Joe_F
Check the autolibrary.org link I have below and see if they have anything there.