1976 chevy 3/4ton CK auto-trans and transfer case help
#1
1976 chevy 3/4ton CK auto-trans and transfer case help
hello can someone please tell us how to remove the transfer case off of the end auto-trans that we are replacing we have removed the 4 bolts from the housing but it seems not to want to slide,all the how to books we have seem not to have this part in them ,1976 chevy 3/4ton CK, are we missing something any help on this please,should also said this is a 4x4
Last edited by hilliard4; 12-09-04 at 09:31 AM. Reason: should also said this is a 4x4
#2
Member
Join Date: Oct 2004
Location: Ontario
Posts: 533
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Disconect front and rear drive shafts
Disconect shift leaver
Remove the case bolts
slide case rearward untill case clears input shaft
if im not mistaken there are 5 or six bolts to hold it but it has been a long time since i had one apart
Disconect shift leaver
Remove the case bolts
slide case rearward untill case clears input shaft
if im not mistaken there are 5 or six bolts to hold it but it has been a long time since i had one apart