Paint Questions

Reply

  #1  
Old 04-15-05, 08:17 PM
Member
Thread Starter
Join Date: Mar 2005
Posts: 5
Paint Questions

I used a 3M eraser wheel to remove my factory pinstripe and debadge my 98 chevy P/U today. Have not removed molding as of yet, but plan to. This piece by 3M is awesome! Made quick work of pinstripe and adhesive left from badges. However I can still see where the pinstripe was on the paint, and can see 'Chevrolet' outline on tailgate. Any ideas how to make these problems better? Also how could I repair minor scratches in paint? Thanks
 
Sponsored Links
  #2  
Old 04-18-05, 05:53 AM
Member
Join Date: Oct 2004
Location: Ontario
Posts: 539
get some good buffing compound and start buffing it out if its not to deep it should come out
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'