replacing steering knuckle on 84 dodge
#1
Member
Thread Starter
Join Date: May 2007
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
replacing steering knuckle on 84 dodge
I have an 84 Dodge truck and my steering knuckle joint is broke. I've got the parts to replace the joint, but I havn't a clue how to do it. I was wondering if there is a free website I can go to for some info on how to do it myself.
#2
Member
Join Date: Oct 2004
Location: Ontario
Posts: 533
Upvotes: 0
Received 0 Upvotes
on
0 Posts
go to your lcal library you can more than likely get a repair manule on lone or at least photocopy what you neeed from it or just go and buy one these are your best bets there may be special tools requiored to do this repair if the upper balljoint came through the control arm you than must replace controlarm also the new balljoint will not last long if reused old control arm
#4
Member
Thread Starter
Join Date: May 2007
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
THANKS "AutoDoc" with all this internet stuff I just didn't even give it a thought about going to the library. I'll probably head there after this holiday weekend is done. "michaelGlenn" it's on the steering arm that comes off the steering box. It's the joint that's like shortly off the box on the way to the steering wheel.