hard to shift into gear and revers grindes

Reply

  #1  
Old 10-19-09, 08:27 PM
Member
Thread Starter
Join Date: Sep 2009
Location: cedar rapids ia
Posts: 25
hard to shift into gear and revers grindes

hello, I just replaced a clutch plate on a 89 mazda b2200. I got everything put together but now it's hard to shift into gears, almost got to force it in 1st and 2nd gears, and when I try to put into reverse it grinds really bad, but does go in gear. and yes I have fluids in there. please help!!!!!
 
Sponsored Links
  #2  
Old 10-19-09, 08:40 PM
Member
Join Date: Aug 2006
Location: santa fe /texas
Posts: 998
previous -experience,most comon-1st-air in hyd. clutch assy
2 nd-clutch-disk(friction material) installed ,incorectly,-'wrong face'to fly wheel.
 
  #3  
Old 10-19-09, 08:49 PM
Member
Thread Starter
Join Date: Sep 2009
Location: cedar rapids ia
Posts: 25
Originally Posted by newtofta View Post
previous -experience,most comon-1st-air in hyd. clutch assy
2 nd-clutch-disk(friction material) installed ,incorectly,-'wrong face'to fly wheel.
Hi! thanx for helping again.

I am for sure that I installed the disk correctly. "air in hyd" : do I need to bleed to clutch fluid again? possibly? I did do it by my self pressing to clutch peddle with a bar wile I bleed
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'