Toyota Land Cruiser brakes


  #1  
Old 01-12-13, 08:30 AM
J
Member
Thread Starter
Join Date: Jan 2013
Location: usa
Posts: 2
Received 0 Votes on 0 Posts
Toyota Land Cruiser brakes

I have a 1970 Toyota Land Cruiser. I did a disc brake conversion on both the front and back axels. I took a power brake booster from a Toyota pick up and bought a new master cylinder for the same truck and installed the kit that was made for the conversion. The brakes work great except for one thing. I can get all 4 wheels to lock up at about half pedal, but if I keep pushing, the pedal will continue to go all the way to the floor. I replaced all rubber brake hoses as well, and brakes were bled properly.
 
  #2  
Old 01-12-13, 01:02 PM
the_tow_guy's Avatar
Group Moderator
Join Date: Feb 2001
Location: SW Fla USA
Posts: 12,276
Received 146 Votes on 114 Posts
Absent any air in the system, would tend to point to the master cylinder. Did you do a good bench bleed before installation?
 
  #3  
Old 01-12-13, 08:21 PM
iceman681's Avatar
Member
Join Date: Jul 2012
Location: United States
Posts: 484
Received 5 Votes on 4 Posts
my guess would be slight leak some where.
 
  #4  
Old 01-13-13, 05:51 PM
J
Member
Thread Starter
Join Date: Jan 2013
Location: usa
Posts: 2
Received 0 Votes on 0 Posts
Master cylinder was bled, and there are no leaks.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: