abs problem

Reply

  #1  
Old 11-24-15, 10:29 AM
Member
Thread Starter
Join Date: May 2014
Location: usa
Posts: 9
abs problem

I have a 1998 expedition 4wd ,4.6 xlt. I had a couple of parts stores scan the system and one found left front wheel sensor bad. The other found the same +hydraulic pump motor connection fault. Are the two related? Also I have seen conflicting U Tube videos on how to check the sensor using a multy meter. Can you clarify please? Thanks
 
Sponsored Links
  #2  
Old 11-24-15, 11:57 AM
Member
Join Date: Jan 2010
Location: North East Kingdom of Vermont
Posts: 2,283
Have you cleaned it?

Or checked the Reluctor Ring for a build-up of mud or rust ?

I think you can usually remove the Wheel & Tire, then the Sensor (and clean it) with one bolt/screw, and peer into the hole and slowly rotate the Rotor to see if the teeth are clean (and that there are no cracks between them.

Just 2 from a backyard mechanic.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'