Oreo cookies and bearing grease

Reply

  #1  
Old 03-14-17, 10:25 PM
Member
Thread Starter
Join Date: Jul 2007
Location: Arizona
Posts: 1,058
Oreo cookies and bearing grease

I have the 92' Ford Ranger XLT with 2.9 V6. I have two or three pending small auto repair projects. I am going to repack my front bearings for the first time also. Both the bearings and auto locking hub parts are combined on the spindle.

I've already been reading up and studying on this. You know those Oreo cookie packages with the slots for the cookies? I think I am going to use this to keep the parts in the correct order sequence for re-install.

I know the bearings might need replacing. But is there a hardware kit to replace the other parts that sit on the spindle, if needed? Or do you generally re-use most of those parts?
 
Sponsored Links
  #2  
Old 03-15-17, 04:48 AM
Forum Topic Moderator
Join Date: Mar 2005
Location: USA
Posts: 43,241
I've always reused all the parts. You can set the pieces on a rag or whatever in the order they come out if that helps you keep the sequence right. Unless there is a broken piece I'll only replace the bearings if needed.
 
  #3  
Old 03-15-17, 07:35 AM
Member
Thread Starter
Join Date: Jul 2007
Location: Arizona
Posts: 1,058
Ok. Thanks. I always have to remember enter at least 25 characters for a reply
 
  #4  
Old 03-15-17, 07:56 AM
pugsl's Avatar
Forum Topic Moderator
Join Date: Mar 2008
Location: Raleigh, NC
Posts: 7,684
dots at end work.....................
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'