Is this how I wire fuel pump sender connector?

Reply

  #1  
Old 08-20-19, 08:58 PM
Member
Thread Starter
Join Date: Jul 2007
Location: Arizona
Posts: 1,184
Received 1 Vote on 1 Post
Is this how I wire fuel pump sender connector?

Same old 92' Ford Ranger XLT with 2.9 V6. I got the new in-tank fuel pump installed from related posting. But when I disconnected the old fuel pump sender connector, I found it to be in bad shape and falling apart. I have a new connector ready to install this coming Saturday, It came with crimp terminals and heat shrink tubes.

The new connector has four black wires. The wiring bundle from the truck has colored wires
(attached photos). I think I know how to connect the wires.

I orient the new connector exactly like old one, with locking tab facing down.

Then

OUTER LEFT BLACK WIRE is crimped to ORANGE WIRE
INNER LEFT BLACK WIRE is crimped to YELLOW WIRE
INNER RIGHT BLACK WIRE is crimped to RED WIRE
OUTER RIGHT BLACK WIRE is crimped to BLACK WIRE

....................correct?
 
Attached Images   
Sponsored Links
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description: