Early 1970 CentralBrass Two Valve Shower Faucet

Reply

  #1  
Old 05-20-03, 04:00 PM
Member
Thread Starter
Join Date: Jul 2002
Location: Usa
Posts: 15
Early 1970 CentralBrass Two Valve Shower Faucet

I Have a Early 1970 CentralBrass two valve shower faucet.

I need to replace the washers,but I can not remove the brass
tubes.So,I can remove the stems. I removed the stem seals and unscrew the stem,but the washer end is to big to be remove with out removing the bonnet.Any advice,Thanks
 
Sponsored Links
  #2  
Old 05-20-03, 06:59 PM
Join Date: Dec 1999
Location: Northeastern NC On The Albemarle Sound
Posts: 10,952
Cool

The brass tubes should unscrew counter-clockwise. Spray a little WD-40 on them at the bonnet to see if that doesn't help.
You may still need a set of valve sockets to get the valves out after you remove the bonnets.
You can do a Search above on Shower Faucets for more info.
Good Luck!
Mike
 
  #3  
Old 06-15-03, 05:28 PM
Member
Thread Starter
Join Date: Jul 2002
Location: Usa
Posts: 15
Thanks OldGuy,The wd-40 worked
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes